Features:

1. There will be no bubbles generated when stirring the ink.
2. The blades of a conventional blade mixer need to be cleaned periodically; the mixer has no the problem, so the area around the mixer can be always clean to reduce the industrial pollution.
3. The new vacuum ink mixer further has the ink temperature window; users can clearly see the temperature of the stirred ink. If the vacuum suction force is too strong, the window will also show an alert message to inform users of the problem to prevent the ink from being absorbed into the vacuum pump in order to extend the service life of the vacuum pump.
4. The new vacuum ink mixer further has the safety micro switch; if any ink can is ejected out, the mixer will automatically turn off the power supply of the motor to stop the oscillation.
5. After the new vacuum ink mixer starts up, the vacuum meter will show whether the ink can have reached the vacuum standard for users to understand the situation of stirring the ink.
6. The stirring process will be finished within 6-10 minutes; the viscosity of the ink can be up to 400,000 c.p.s.
7. The slides of the pneumatic-type oscillation ink mixer have no teeth; therefore, users do not have to worry that the teeth of the slide may be damaged.
8. If the clamps of the top clamping plate of the mixer fail to reach the predetermined positions (the top clamping does not clamp the fixture can), the mixer will automatically detect the situation and stop immediately to keep users safe.
9. Two-point type combination; when the top clamping plate fails to tightly clamp the fixture can, users can apply pressure to modify the problem.
10. Simple operation; the movement of fixing the fixture can is able to be done by only one button.
11. The ink cans are fixed by the hydraulic cylinder; users no longer have to periodically replace the holder.
12. The mix adopts high-quality FESTO pneumatic components of (German).